Polishing Marks

 

 

Description

Abrasive damage to paint surface. 

Cause

Abrasive damage to the paint film due to:

  1. Compounding or polishing the surface before fully hardened.
  2. Excessive pressure or speed of mechanical polisher.
  3. Use of too coarse or ammoniacal compound or incorrect polish, dirty or coarse polishing cloth or mop.

 

Prevention

  1. Allow surface to harden fully before compounding or polishing.
  2. Use mechanical polishers at minimum pressure and correct speed.
  3. Use the correct grade and type of compound and polish, ensure polishing cloths or mop are soft and clean.
  4. Go over polished area with a pre-cleaner and a soft cloth to remove polish residue as a final check.

 

Rectification

Allow the surface to harden fully, flat compound and polish. In severe cases, flat and repaint the surface film.

 

 

Other Defects:

Back

Site Cookies

This site uses cookies to ensure that it gives you the best experience on our website and for gathering information about you in accordance with our cookie policy. If you continue to use our website, we will assume that you consent to receive the cookies on the selemix.com website as explained in our cookie policy, unless you change your cookie settings